| Prefab house package |
400–1,000 sq. ft. home |
$80,000–$220,000 |
Factory-built structural components, standard interior finishes, windows, doors, basic kitchen and bathroom fixtures, and factory preparation for installation. |
Floor area, floor plan complexity, finish level, insulation requirements, climate zone, and whether the package is shell-only or move-in ready. |
| Site survey and soil testing |
Per building site |
$1,000–$4,000 |
Boundary or topographic survey, basic geotechnical review, soil testing, and preliminary site evaluation. |
Lot size, slope, wetlands, rock, expansive soil, flood-zone requirements, and local engineering requirements. |
| Site clearing and grading |
Per site |
$5,000–$25,000 |
Removal of light vegetation, limited tree clearing, rough grading, excavation, leveling, and preparation of the building pad. |
Terrain, tree removal, boulders, soil disposal, drainage needs, retaining walls, and equipment access. |
| Foundation |
400–1,000 sq. ft. footprint |
$12,000–$40,000 |
Concrete piers, crawl-space foundation, slab, or other engineered support system, including basic reinforcement and site installation. |
Foundation type, frost depth, slope, soil bearing capacity, seismic requirements, basement construction, and local labor rates. |
| Driveway and access preparation |
Short residential access route |
$3,000–$20,000 |
Gravel or paved driveway work, temporary construction access, culverts, turning space, and delivery-route preparation. |
Driveway length, surface material, slope, drainage, bridge limits, narrow roads, and whether heavy delivery equipment can reach the lot. |
| Electrical utility connection |
Per connection |
$2,000–$15,000 |
Service connection, trenching, conduit, meter base, electrical panel connection, and utility-side contribution where applicable. |
Distance to the nearest service point, underground versus overhead service, transformer requirements, trench length, and utility extension fees. |
| Water connection or well |
Per property |
$2,000–$25,000 |
Municipal connection and service line, or private well drilling, pump equipment, pressure tank, and basic testing. |
Distance to the public main, drilling depth, groundwater conditions, required filtration, permits, and water-quality standards. |
| Wastewater connection or septic system |
Per property |
$4,000–$25,000 |
Municipal sewer connection and lateral, or septic tank, distribution system, drain field, installation, and testing. |
Percolation results, soil type, system capacity, lot size, slope, sewer availability, pumping distance, and local health regulations. |
| Natural gas or propane setup |
Per property |
$1,000–$8,000 |
Propane tank and lines, gas service connection, regulators, basic trenching, and appliance connection work. |
Fuel choice, distance to the gas main, tank size, trench length, local inspection requirements, and heating-system design. |
| Internet and communications |
Per connection |
$500–$5,000 |
Service drop, conduit, cable or fiber extension, and basic interior termination. |
Availability of nearby service, distance from the road, trenching, rural service limitations, and wireless versus wired installation. |
| Transportation and delivery |
Factory to building site |
$5,000–$25,000 |
Oversize-load permits, pilot vehicles, carrier fees, loading and unloading, route planning, and delivery of modules or panels. |
Travel distance, number and size of modules, road restrictions, escort requirements, tolls, seasonal conditions, and site accessibility. |
| On-site setting and assembly |
Per home |
$10,000–$45,000 |
Crane or setting equipment, module placement, structural connections, weatherproofing, utility tie-ins, and finish work between modules. |
Home configuration, crane reach, number of modules, foundation readiness, weather, local labor availability, and finish specifications. |
| Permits, design, and inspections |
Per project |
$3,000–$15,000 |
Building permits, plan review, engineering, impact-related charges, trade permits, inspections, and certificate-of-occupancy costs. |
Local fee schedules, required engineering, utility impact fees, energy-code requirements, zoning approvals, and site-specific variances. |
| Estimated project total |
400–1,000 sq. ft. home |
$130,000–$470,000 |
Indicative combined budget for the house package, preparation, foundation, utilities, delivery, installation, permits, and typical site-related work. |
Remote or difficult sites can exceed this range. Land purchase, financing costs, landscaping, furnishings, and major retaining-wall work are not included. |